Click on the image to check the artwork
By certification 
Product Parameter
MODEL |
D2 |
Length X Width X Height |
1695-680-1050mm |
Rated power |
380W |
Rated Voltage |
48V |
Recommended battery type |
Lithum battery |
Distributive battery specification |
48V26A |
Max.Speed |
40km/h |
Range |
70km |
Motor type |
Brushless /hubmotor |
Grade-ability |
20 degree |
Front brake |
160*3.5mm disc |
Front tire specification |
16-2.5 |
Rear tire specification |
16-2.5 |
Front wheel hub specification |
2.5-16 |
Rear wheel hub specification |
2.5-16 |
maximum load |
75kg |
Ground Clearance |
180mm |
20-foot container |
42 units |
40'HC (pcs) |
144 units |
Product Considerations
1: Before installing the battery, check whether there are hard objects in the battery box or whether the battery box is flat.
2: When charging, the charger should be placed at the foot pedal, and it is strictly prohibited to cover or place it on the cushion, inside the bucket.
3: It is forbidden to modify or install whole vehicle lines without permission.
4: It is forbidden to use a high-pressure water gun to wash the interior of the electric vehicle to avoid short-circuiting the internal circuit.
Products Production Process
Assembly procedure | |
parts assembly |
tire assembly |
Balance and driving parts |
Left and right beam, rear wheel, differential mechanism, motor installation. |
Steering and support frame assembly |
Front steering bridge, leaf spring, flexible connecting plate, Leaf spring rubber sleeve, installation of steering gear, fixing, steering angle adjustment. |
Accessories, and display combinations |
appearance accessories and lighting apparatus |
display panel, switch. | |
Structure frame assembly |
car frame, nameplate, GPS installation, flow chart. |
installation of steering gear and car frame | |
brake system (brake panel, hydraulic pump, Tee and tubing) | |
steering front axle, | |
rear wheel | |
Electrical and auxiliary parts |
controller, transformer, charger, reverse speaker, headlight, speaker, oil container, flexible pipe. |
transported to assembly line | |
fill in the brake oil | |
electric wire fixing, electrical parts plug connecting | |
Dashboard (display panel) | |
battery installation and wiring | |
Front left and right fender, front housing installation, | |
lights combination wiring and check | |
front left and right housing, base plate, and other shells installation. | |
steering gear installation, leave the assembly line | |
test |
test |
packaging & shipping |
shippment |
FAO
1. Can you do your logo or brand on the electric motorcycle?
No problem, if you order 200pcs, we can do it for free, if you order less than that, we charge $500 for it at first, and you don't need to pay for it anymore in future order, when your orders reach 200pcs, we can refund this $500 to you.
2. Can I order some samples at first to see the quality?
No problem, if your order is less than 5 pcs, we need to charge some extra sample fee, the amount is based on your specific quantity, when your orders reach 200pcs, we can refund you the sample fee.
3. Can you change configuration for me?
No problem, we can change configuration based on your request.
Patent Certificate
http://www.tesmakjs.com/
